Tag Archives: 3-phase transformers

How to save electricity & reduce base cost with custom transformers

8th October 2015

Save electricity through strategic planning  What is 3 phase power?

3 phase power is harnessed by most electrical grids worldwide for electric generation, transmission and distribution. By carrying 3 alternating currents of the same frequency and voltage (each phase synced to reach its peak at one third of a cycle), 3 phase power provides consistent power delivery which is highly efficient and subsequently hugely economical.

This is largely attributed to the reduction of energy loss during transmission.

The same cost benefits of using 3 phase electricity to control energy loss and achieve voltage optimisation can be leveraged in industrial and commercial applications, through the installation of step up and step down transformers. Such electrical devices convert a high energy supply into a lower energy supply or vice versa.

This gives industrial users the flexibility to vary power delivery, ensuring large equipment such as motors (compatible with three phase power) run on optimum performance and greater energy efficiency. This is especially applicable for industries who rely on heavy duty equipment with high energy consumptions to sustain their business processes. The strategic use of 3 phase transformers can also support energy management systems, introducing an effective cost control measure.

This is because with the right three phase transformer connections, you can minimise energy wastage and sustain consistent power delivery of optimised voltage.  This control mechanism helps save electricity whilst helping to preserve the integrity of your machines to enable longevity.  

With rising energy bills this can be a critical factor in helping you drive down your base cost.    Made to order custom transformers may be the solution for businesses with specialist needs whilst other businesses may simply require standard electrical transformers to step down or step up voltage. Either way, all our transformers are manufactured to UK and international safety standards and are available with fast delivery. With over 20 years experience, our products help businesses across many industries, operating in both the public and private sectors, get the most out of their energy supply.

Talk to our technical department today to see how we can help your business become more energy efficient.  Call us on 01494 524396 or enquire online today!

How to Avoid Over Voltage and Prolong Equipment Lifetime

21st August 2015

Maintenance of large electrical equipment in buildings is essential for safety but is also needed to review economical and energy efficiency.

Breakdown or electoral faults with large equipment can disrupt business operations, causing safety hazards and may have costly implications.

Installing high-efficiency electrical transformers for heavy load equipment on continuous duty is one reliable method of reducing energy consumption and achieving greater economical results, whilst helping preserve the integrity of your equipment. This could significantly improve the life expectancy of electronic equipment.

But how?

Let’s start with voltage…

As a result of European Harmonisation in 1995, the declared electricity supply in the UK is now 230V with a tolerance of +10% to -10%.

Most electrical equipment manufactured for the UK is rated at 220V but may operate satisfactorily at voltages down to 200V. As the average voltage supplied from the national grid in mainland UK is 242V, without voltage optimisation technology to step down the voltage, over – voltage can occur.

This is when voltage, higher than the equipment is designed to operate on, is supplied. Sub-sequentially energy consumption goes up with no improvement in performance or economical benefit.  In fact over voltage be a large contributing factor to the reduction in equipment lifetime.

According to the 17th edition of the Electricians Guide BS7671, “A 230V rated lamp used at 240 has will achieve only 55% of its rated life”. By efficiently bringing supply voltages to the lower end of the statutory voltage range, you could yield average energy savings of around 13%. This is also a great step towards prolonging the life of the connected equipment.

Voltage optimisation technology

Where there is a national problem of over voltage, Voltage Optimization / Voltage Power Optimisation is a particularly effective means of saving energy and money in the UK, for both industrial users and domestic energy consumers.

Once again according to the Electricians Guide BS7671,  “A 230V linear appliance used on a 240V supply will take 4.3% more current and will consume almost 9% more energy.”

In industries using high energy loads for arduous equipment, three phase transformers are commonly used for 3 phase power supply systems, to step up or step down voltage. These energy saving devices ensure equipment is supplied with the lower end of the statutory voltage range to enable optimal performance with maximum energy efficiency.

Where 3 phase transformer are primarily used to step up or down voltage, Transformers voltage stabilizers are an effective solution to voltage fluctuation problems, as they are designed to accept a wide range of input voltage but maintain a specified output voltage to within +/- 1.0%. Voltage stabilisers can also be designed for three phase and single phase supply.

As a specialist UK Transformer Manufacturer and supplier of Mains Transformers and AC/DC Power Adaptors, we supply literally hundreds of thousands of wound components. Providing a high degree of technical support, including specialist power supply sub-assembly services, we can design and manufacture virtually any size Summer of single or 3 phase transformer or recommend the right voltage optimisation Why device for your requirement.

For advice on improving your energy efficiency, why not give our experts a call today on 01494 524 396 or click here to enquire online.

Three Phase Transformers – the basics

20th July 2015

Be greener with a three phase transformer

Be greener with a three phase transformer

3 phase transformers are commonly used for energy distribution, especially in industrial facilities with когда big equipment – but why?

By carrying 3 alternating currents of the Saving same frequency and voltage, the total amount of power supplied by a 3 phase electric power system remains constant. This is because each phase is synced to reach its peak at in one third of a cycle.

This consistency in power delivery is highly efficient, providing many electrical advantages and making it more economical, as it uses less conductor material and reduces the amount of electrical energy lost to resistance.

Therefore it makes sense to leverage 3 phase power systems in industrial settings that require cheap mlb jerseys high energy loads.

Electrical Transformers

Since three-phase systems are often used for power distribution systems, three-phase transformer devices are commonly used throughout industry to step-up or step-down voltage. This helps to achieve energy efficiency through voltage optimization, whilst ensuring the right voltage is delivered for various electrical equipment and devices.

It is vital the transformer type is compatible with the electrical wholesale nba jerseys supply system – incorrect connection can cheap jerseys from China damage equipment whilst being highly dangerous!

Whilst three phase transformers can be constructed from 3 individual single phase transformers connected together, preassembled 3 phase transformer devices are smaller, lighter and cheaper. This is because the copper and iron are used more Management effectively, mounted into one single device, unlike their modular counterparts.

As 3 phase transformer suppliers, we currently manufacture 3-phase transformers from 50VA up to 2MVA. As Women our aim is to supply high quality, reliable transformers, we can manufacture virtually any size of single or three phase transformer, dependant on voltage, with any type of termination incorporated into the design.

By choosing the right electrical devices for your requirements, you can save money, reduce your energy consumption and protect your equipment.

If you have any special requirements or simply need some guidance on selecting the right electrical devices – why not talk to our technical team?!

You can contact our support service by calling us on 01494 524 396 or click here to enquire online.